REDDNet Depot Installation Instructions

From ReddNet
Revision as of 16:48, 1 April 2010 by Wikiadmin (talk | contribs)
Jump to navigation Jump to search

Installation instructions

IMPORTANT!!! Do not plug the power cable in until step 5. If you plug the power in before connecting the management network cable, then the IPMI module will not initialize properly and remote management/KVM will not work.

Before you begin, please make sure you have met the basic site requirements

Back of depot
  1. Unpack the machine, install the rails, and mount in your rack as you normally would.
  2. Plug in an ethernet cable to the management port.
  3. Plug in an appropriate network cables to the data ports (depends on whether you are using 10 Gb or 1 Gb)
  4. Plug in the REDDNet USB key into a free USB port.
  5. Plug in power cable.
  6. Turn on depot.